Last Modified: 11-29-2007 1.6 A
Service Category: Steering Section: Power Assist Systems
Model Year: 2008 Model: Sequoia Doc ID: RM000002H5900FX
Title: POWER ASSIST SYSTEMS: VANE PUMP (for 3UR-FE): INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL VANE PUMP ASSEMBLY

(a) Install the vane pump with the 2 bolts.

Torque: 28 N·m (286 kgf·cm, 21 ft·lbf)

2. CONNECT PRESSURE FEED TUBE



(a) Install a new gasket to the pressure feed tube.

(b) Install the pressure feed tube with the union bolt.

Torque: 51 N·m (520 kgf·cm, 38 ft·lbf)

3. CONNECT SOLENOID VALVE CONNECTOR



(a) Connect the solenoid valve connector.

4. CONNECT POWER STEERING OIL PRESSURE SENSOR CONNECTOR



(a) Connect the oil pressure sensor connector.

5. CONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE



(a) Connect the hose with the clip.

6. CONNECT HARNESS BRACKET



(a) Install the bracket with the bolt.

7. INSTALL RADIATOR ASSEMBLY

(a) Install the radiator assembly 3UR-FE COOLING: RADIATOR: INSTALLATION (2008 Sequoia) .

8. ADD POWER STEERING FLUID

9. BLEED POWER STEERING FLUID POWER ASSIST SYSTEMS: POWER STEERING SYSTEM: ON-VEHICLE INSPECTION (2008 Sequoia)+

10. INSPECT FOR POWER STEERING FLUID LEAK